433MHz smart copy duplicator remote control for gate

Details

Item type

Other

Condition

New

Category

Garden & Outdoor,Home & Garden

Ad reference no.

18400

Posted on

10 Jun 2025 01:26 PM

Description

1.Chips could be copied: 2260(all manufacturers); 2262(All manufacturers); PT2264, 5326(All manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series, 527(All manufacturers); 1527 (All manufacturers); 2240 (All manufacturers); HCS101, HCS200\HCS201 (part code), HCS300\HCS301(部分代码), part single chip microcomputer.......... 2.Code cleaning method: I) When you press A and B at the same time, the LED indicator will be steady for 1 second and then blink II) If the clearing code is successful, it means that all key stored data has been cleared. If the operation is not completed, you can repeat the above operation to clear it once III) After the completion of the clear code, press any key will flash. Press the key without data is a flash. Press the key with data is a LED indicator light is steady on to send data Note: The original remote control cannot perform code clearing operation! 3. Copy method: One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote controls have smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. (Attention: Your original remote control must be able to work and the same as our remote-control frequency） Notice: The essential condition for the selection of the remote control; the copied remote control operates normal, chip is compatible, and frequency is correct. Before buying, please make sure the copied remote control operates frequently or choose & buy the frequency adjustable type remote control. Before buying, please confirm whether your remote control can be copied or not. Our remote control can copy the fixed codes and learning codes rather than stealth cod Copying method: Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off. Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on - off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys. NOTE: This product can copy the remote control with the following chip inside: PT2264, PT2262, PT2260, PT2240, SC2262, SC2260, EV1527, SCT527, HS1527, HS2240, SCL1527, FP1527. If you fail in copying with proper operation, you might have to check whether your device has a chip above. If IC chips cannot match, it will not be copied, please verify the chip model before you buy. Operation method: 1. Code pairing (learning) Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning. Two, clear code Press the unlock button and the lock button at the same time for 2 seconds, the LED light starts to flash 3 times. At this time, keep the lock button pressed, and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light flashes quickly. The code has been cleared. Specifications: Product: remote control Color: Silver black Operating frequency: 433MHz Channel: 4 Distance: Up to 100 meters Operating Current: ≤ 8mA Modulation Mode: ASK (AM) The transmission power: ≤ 100mW Emission Distance: 50 to 100 m (proof) The encoding type: self-Copy Material: Durable ABS plastic Color: Sleek silver black Working voltage: DC12V (27A) Battery: DC12V (27A) battery included (Ready to use) Dimensions: Compact 55mm*30mm*15mm Package Weight:33g